Bathroom Renovation in Seattle, WA
Sea Renovation handles bathroom renovations for Seattle homeowners who want a bathroom that works better day-to-day and holds up to constant use. Along with ventilation and waterproofing built for a damp climate, we plan around the aging plumbing found in older homes and the city’s split permit process for building and plumbing work.
As a licensed and insured contractor with more than a decade of high-end construction experience, we handle your bathroom renovation from design and permits through the final walkthrough. Talk with our team about your bathroom project.
What a Bathroom Remodel Gives You
You get a bathroom laid out around your routine, with storage within easy reach and room to move around the vanity without a cramped layout working against you. Your shower or tub stays watertight because a protective layer is built behind the tile, so grout and caulk aren’t the only safeguard. Steam clears quickly, and the room stays free of the musty smell and mildew found in so many Seattle bathrooms. Custom tile, the vanity, and every finish in between feel considered on day one and keep looking that way for years to come.
Old plumbing and hidden damage are addressed while the walls are open. This saves you from reopening a finished bathroom a few years from now because of a corroded supply line or a soft subfloor that was already a hidden problem.
Bathroom Renovation Services We Offer
Sea Renovation takes on bathroom projects of any size, whether that’s a single shower upgrade or a full gut remodel. One team handles tile and fixture work, so you aren’t juggling separate contractors for each trade.
Full Bathroom Remodeling
A full remodel takes the bathroom down to the studs and rebuilds the layout, plumbing, electrical, ventilation, waterproofing, tile, fixtures, and finishes. It fits bathrooms where the layout no longer works or multiple surfaces have worn out at the same time. Relocating the toilet or the shower means rerouting supply and drain lines, which we also handle.
Shower Installation and Tub-to-Shower Conversions
Walk-in and curbless showers with tiled walls and glass enclosures are common in our shower installation in Seattle, and many projects start by replacing a rarely used tub with a larger shower. It’s a good fit if you want more room and easier daily use.
Bathtub Replacement
Our bathtub replacement in Seattle swaps a worn tub for a new alcove, drop-in, or freestanding model. It makes sense in bathrooms where a tub is still important, such as in a primary suite. Freestanding and large soaking tubs may need floor reinforcement and plumbing changes, so we confirm those details during planning.
Custom Tile Installation
Our bathroom tile installation covers floors, shower walls, niches, and accent walls using porcelain, ceramic tile, and natural stone. The layout and substrate prep, along with the waterproofing beneath the tile, matter as much as the tile you choose. Large-format tile and natural stone need a flatter substrate and more prep, making the project more involved.
Custom Vanities and Storage
We build vanities, medicine cabinets, linen storage, and built-ins sized to the room, which is how our custom bathroom vanities fit the way you use the space. That approach pays off most in smaller Seattle bathrooms, where every bit of storage counts. Changing the vanity size or switching to a double vanity can mean moving supply and drain lines.
Accessible and Aging-in-Place Bathrooms
Accessible bathrooms bring in curbless showers, comfort-height toilets, wider entries, slip-resistant flooring, and grab bars anchored to blocking (solid wood framing added behind the wall). This work benefits homeowners planning to stay in their house long term or remodeling for a family member.
Explore Our Bathroom Renovation Projects in Seattle
Bathroom Remodeling Projects We Handle
Every bathroom serves a different purpose in your home, so we scope our projects around who uses the room and how they use it day to day.
- Primary bathrooms: Larger showers, double vanities, and soaking tubs planned around a daily routine that two people share.
- Hall and guest bathrooms: Durable, easy-to-clean finishes for bathrooms shared by kids, extended family, or overnight visitors.
- Small bathrooms and powder rooms: Layouts, storage, and lighting that make tight Seattle bathrooms feel larger without moving a wall.
- Condo and townhome bathrooms: HOA approvals, building access, and waterproofing that protects the unit below, all coordinated on your behalf.
- Basement bathroom additions: New bathrooms below grade, planned around drainage and ventilation as part of basement remodeling in Seattle.
- Bathroom remodeling within a larger renovation: One team coordinating your bathroom and kitchen, basement, or whole-home work on a single schedule.
Bathroom Remodeling Considerations for Seattle Homes
Local houses include early-1900s homes with original plumbing, as well as newer condos, and the climate keeps indoor humidity high for much of the year. Both factors shape how bathrooms are planned here.
Ventilation and Moisture in Seattle's Damp Climate
With a long wet season and cool temperatures, bathroom moisture in Seattle doesn’t dry out on its own the way it might in a drier climate. This is why mildew and peeling paint are so common here. The fix starts with a properly sized exhaust fan ducted outdoors and a waterproofing membrane behind the shower tile. Walls and ceilings then get mold- and moisture-resistant materials.
Plumbing and Hidden Issues in Older Seattle Homes
Many older Seattle homes still have galvanized steel supply lines or cast-iron drains, and both corrode and restrict flow with age. Because the walls are already open during a remodel, it’s the most practical time to replace aging pipe, and subfloor damage from past leaks is often visible too. Homes built before 1978 may have lead paint, while old flooring and tile adhesives can contain asbestos, so testing comes before demolition.
Seattle Bathroom Permits
Cosmetic updates like swapping a faucet or replacing a vanity in place don’t need a permit, unlike relocating plumbing, adding an electrical circuit, or changing a wall. In Seattle, building and electrical permits go through the Seattle Department of Construction & Inspections (SDCI), while plumbing permits are issued by Public Health – Seattle & King County. We handle both applications so you aren’t dealing with two agencies, though approval timing and conditions are set by the reviewing office.
Our Bathroom Remodeling Process
Bathroom remodeling involves specific phases, so you always know where your project stands and what follows.
Consultation and Design Planning
We start with an in-home visit to talk through how you use the bathroom and what isn't working for you. From there, we measure the space and check the existing plumbing and ventilation, watching for any signs of water damage that could affect the plan.
Selections and Permitting
Together, we finalize the layout, the tile, the fixtures, and the vanity, then handle SDCI and Public Health permit applications where the scope requires them. We order materials early so long-lead items like custom glass or specialty tile don't hold up the schedule once demolition begins.
Demolition and Rough-In
The old bathroom comes out while the rest of your home is protected. New supply lines, drains, wiring, and fan ducting are then roughed in (the in-wall work done before finishes), and any hidden damage is repaired. Required inspections happen before the walls close.
Waterproofing, Tile, and Fixture Installation
Waterproofing goes in behind and beneath the shower before tile is set, and it's the step that determines how long your bathroom lasts. Tile follows, then the vanity, fixtures, shower glass, and finish trim.

Final Walkthrough and Cleanup
Once the work wraps up, we clean the site and get the final inspection signed off where it's required. You then walk through the finished bathroom with our team to confirm everything works and meets your expectations before the project closes.
Why Choose Sea Renovation for Bathroom Remodeling in Seattle
Licensed & Insured Contractor
Hiring a licensed, insured contractor protects you if something goes wrong during the remodel. Verifying a contractor's license is a practical step to take before you hire anyone for work on your home, and we welcome homeowners who want to check ours.
One Team From Demolition to Final Tile
Tile, drywall, flooring, painting, and fixture installation all fall under one contract, so you have one point of contact and one schedule to follow. That includes drywall repair and installation behind new walls, plus interior painting to finish the room.
Experience With Seattle's Older Homes and Permits
We work across Seattle's range of homes and condos, whether that means original early-1900s plumbing or a newer HOA-managed building. Pipe replacement and ventilation are planned before work starts, along with the city's permit requirements, so they don't turn into surprises halfway through.
Transparent Estimates
Your estimate spells out what's included, line by line. If demolition uncovers something unexpected, like a rotted subfloor or a failing pipe, we’ll review it with you and agree on the next step before continuing work.
What Affects the Cost of a Bathroom Remodel
The figures below come from general market data and are not Sea Renovation pricing. Use them to set a realistic working budget before we talk through your specific bathroom.
Scope of the Remodel
Scope, the existing structure, and local labor conditions drive cost more than anything else. Seattle bathroom remodels average around $30,000, with homeowners spending $10,000 to $100,000+. Partial updates like a fixture or flooring swap sit at the low end, while full gut remodels with custom tile and layout changes are costlier.
Moving Plumbing vs. Keeping the Layout
Leaving the toilet and the shower where they are is one of the most effective ways to control cost. Relocating fixtures requires new supply and drain lines, more framing work, and a plumbing permit. In older homes, aging pipe may also need replacing once the walls are open.
Tile, Fixtures, and Materials
Material choices can quickly swing the budget. A standard shower remodel or tub-to-shower conversion in Seattle typically costs $12,000 to $22,000, while standalone bathtub replacement can run $3,500–$12,000+ depending on structural and plumbing requirements. Natural stone, large-format porcelain, frameless glass, and designer fixtures tend to sit on the higher end.
Permits and Older-Home Conditions
Individual Seattle trade permits run $300 to $800 each, depending on the work, and a full remodel may require separate building, plumbing, and electrical permits, bringing the total closer to $1,100–$1,500. Once demolition begins, a rotted subfloor or a corroded pipe can add cost, and so can hazardous-material testing in homes built before 1978.

Getting an Accurate Estimate
Averages don’t tell the whole story because your layout choices and whatever is hiding behind the walls can push the number in either direction. The most dependable way to estimate the total cost is to have our team assess your bathroom in person. Talk with Sea Renovation about your project when you're ready to start planning.
What Our Clients Say
We Accept All Types of Payments




Bathroom Renovation Service Area
Sea Renovation offers bathroom renovation to homeowners in Seattle and throughout the service area that includes Bellevue, Renton, Redmond, and Kirkland WA.
Frequently Asked Questions
How much does a bathroom remodel cost in Seattle?
Seattle bathroom remodels average around $30,000, depending on the size of the job. Partial fixture replacements fall far below that number, but full remodels with layout changes and custom tile cost more. Scope and plumbing changes have the biggest effect, followed by the material selections. The most reliable estimate comes from having our team see your bathroom in person.
Do I need a permit to remodel my bathroom in Seattle?
It depends on the scope. Cosmetic updates generally don’t need one, but relocating plumbing or adding electrical work typically does, and so does changing a wall. In Seattle, building and electrical permits go through SDCI, while plumbing permits come from Public Health – Seattle & King County. We’ll handle the permitting as part of your project.
How long does a bathroom remodel take?
Timelines depend on scope and permitting, plus how long your materials take to arrive. A shower or fixture update moves faster than a full gut remodel with relocated plumbing and custom tile, and inspections add time between stages. We’ll give you a realistic timeline before work begins, so that you can plan around it.
Can you convert my bathtub into a walk-in shower?
Yes, tub-to-shower conversions are among the most common bathroom projects we take on. The new shower needs proper drainage and waterproofing, and sometimes framing changes, especially for a curbless design. If it’s the only tub in your home, the resale tradeoff is worth weighing, and we can talk that through with you.
How do you prevent mold in a Seattle bathroom?
Manage moisture at the source. Start with a properly sized exhaust fan vented outside and a waterproofing membrane behind the shower tile. Moisture-resistant materials on the walls and ceiling add another layer of protection. In Seattle’s damp climate, these steps matter more than the finishes, and we build them into every bathroom remodel.
Should I replace old pipes during the bathroom remodel?
Often, yes. Many older Seattle homes still have galvanized supply lines or cast-iron drains, and replacing them while the walls are open usually costs a lot less than reopening a finished bathroom later. We’ll assess your existing plumbing and recommend what makes sense for your home and budget.
Can you remodel a bathroom in a Seattle condo or townhome?
Yes. Condo bathroom remodels usually involve HOA approval, a certificate of insurance for the building, scheduled elevator or loading access, and waterproofing that protects the unit below. We coordinate those requirements with your building management, so you aren’t left relaying details back and forth.
Can I stay in my home during a bathroom remodel?
In most cases, yes, especially if you have a second bathroom. We protect the rest of the home and keep the work area contained during demolition and construction. If it’s your only bathroom, we’ll plan the schedule with you so you know what to expect each day.
Do you handle bathroom remodeling as part of a larger remodel?
Yes, we regularly combine bathroom remodels with kitchen, basement, and whole-home projects. No matter what’s being done, one team handles your project through the final walkthrough. If you’re planning multiple rooms at once, we can talk through which order is best.