Drywall Repair & Installation Contractor in Seattle, WA
Sea Renovation repairs and installs drywall for Seattle homeowners who want walls and ceilings that look seamless again. From doorknob holes and ceiling cracks to moisture damage common in the city’s older homes, we handle small patches and full installations alike.
As a licensed and insured contractor with more than a decade of high-end construction experience, we offer drywall work as a standalone service or as part of a larger remodel. Talk with our team about your project.
What Professional Drywall Repair Gives You
If the repair is done right, you don’t even notice it. The patch blends into the wall instead of standing out as a different texture or a paint touch-up that doesn’t match. A ceiling with a water stain looks normal again, and you know the moisture problem behind it was fixed, not just covered over. Minor issues, like the nail pop by the stairs or the dent behind a door, stop nagging at you every time you walk past.
Your home starts to feel finished again, the way it did before the damage accumulated. That’s the real measure of good drywall work: you forget there was ever a problem.
Drywall Repair and Installation Services We Offer
We handle drywall work at every scale, small touch-ups and full installation alike, so you’re not stuck finding a different specialist for every type of job.
Drywall Repair
Holes, dents, cracks, and nail pops make up most of the repair calls we get, but even a small patch gets the right process. We cut a clean opening, build up joint compound in multiple coats, and sand between passes so the surface is ready for paint. Skipping these steps is how a quick spackle job ends up visible under the next coat of paint or cracks open again within a year.
Water Damage Drywall Repair
Water-damaged drywall can’t simply be patched over. The affected section usually needs to be cut out and checked for mold before installing new drywall. Just as important, the source of the water must be fixed first, or the same damage can come back within a season. We treat this as its own category of repair, since it involves more than surface patching.
Drywall Installation
New drywall installation comes up during remodels and additions, as well as full wall or ceiling replacements. We hang the board, then tape and mud the seams. From there, we finish the surface smooth and ready for paint. It’s a different scope of work than a repair: there’s no existing texture to match, since we’re building the surface from scratch, which gives us more control over the final result.
Texture Matching and Finishing
Matching existing texture, whether it's orange peel, knockdown, popcorn, or smooth, is one of the places a repair often falls short. Getting it right is part of an effective process. A patch can be structurally sound and still stand out on the wall if the surrounding texture doesn't match, which defeats the purpose of the repair. We treat texture and finish work as a required step on every job, not an add-on for an extra fee.
Popcorn Ceiling Removal
Popcorn ceiling removal and retexturing is a common request from homeowners updating an older house’s look. Once the popcorn texture comes down, it sometimes reveals damage, like cracks or water stains, that wasn't visible before. When that happens, we address it as part of the same project.
Drywall Ceiling Repair
We treat ceiling repairs as their own category because overhead work is more involved than wall work. The area must be staged and accessed, and flaws that are easy to miss on a wall become obvious under raking light on a ceiling. Ceiling damage is also more likely to trace back to other problems, such as a roof leak or faulty plumbing. In addition, condensation in a poorly ventilated space can cause similar staining.
Explore Our Drywall Projects in Seattle
Drywall Projects We Handle
Drywall jobs vary widely in scope. For long-lasting results, we scale our approach and the crew assigned to the project to match the size and cause of the damage.
- Small patches and touch-ups: Doorknob holes, nail pops, and minor cracks that we can usually fix in a single visit.
- Water damage and mold-related repairs: We find and fix the moisture source first, then replace any compromised drywall or insulation, a common need given Seattle’s damp climate.
- Drywall for remodeling projects: Wall and ceiling work handled within your kitchen, bathroom, or basement remodel, especially after plumbing or electrical work opens a wall.
- Whole-room and whole-home drywall: Full room replacements or multi-room installs, scheduled and sequenced with a clear timeline upfront.
- Cracks in older homes: Settling cracks repaired with mesh tape and flexible compound so they don’t reopen within a year or two.
Common Causes of Drywall Damage in Seattle Homes
Knowing what’s causing the damage helps you choose the right fix instead of a repeat repair. Seattle’s climate and older homes create certain damage patterns that show up again and again.
Moisture, Humidity, and Water Intrusion
Seattle’s rain and humidity put drywall near exterior walls, bathrooms, basements, and roof lines at more risk than in drier climates. Catching water damage early, such as discoloration, soft spots, bubbling paint, or a musty smell, keeps it from spreading to a larger area or turning into a mold problem.
House Settling and Age-Related Cracking
Many Seattle homes, including Craftsman bungalows and older houses in neighborhoods like Ballard and Queen Anne, are decades old and naturally settle over time. That settling is often indicated by cracks around doorways and windows, as well as in ceiling corners.
Everyday Wear and Impact Damage
Furniture, doorknobs, moving-day dings, and the usual wear from pets or kids account for most routine drywall damage. It’s also the most common, most straightforward category of repair.
Our Drywall Repair and Installation Process
Drywall work follows a clear, structured process, whether it’s a small patch or a full room, so you always know what phase it’s in and what’s next.
In-Home Assessment
The process starts with an in-person look at the damage. We check whether it's a simple patch or a water-damage repair that needs the source addressed first. Sometimes it turns out to be a larger section that needs completely new drywall. We also note the existing texture and finish, since the repair needs to match it once it's done.
Repair or Installation
Depending on what the assessment reveals, the work is either patching and finishing the existing wall or ceiling, or cutting out and replacing damaged sections and hanging new drywall. We use the technique that fits the job scope rather than adopting a single approach for every situation.
Taping and Mudding
We tape seams and patches, then coat them with joint compound in several thin passes, letting each layer dry before the next. Once the final coat sets, we sand everything smooth so the repaired area sits flush with the surrounding surface.
Texture Matching
We texture the repaired area to match the rest of the wall or ceiling, whether that's smooth, orange peel, or knockdown. This step is what determines whether a repair disappears once it's painted or remains visible.
Final Walkthrough
Once we complete the repair or installation and clean the work area, we walk the finished job with you to confirm it meets your expectations before we call the project done. We typically leave the wall paint-ready, but painting may be a separate step, depending on the project.
Why Choose Sea Renovation for Drywall in Seattle
For dependable, successful drywall installation and repair, we stand out as a trusted local contractor. Here are a few reasons why.
Licensed and Insured Local Contractors
Hiring a licensed, insured contractor protects you if something goes wrong during the project, whether that's damage to your home or an injury on site. Verifying a contractor's licensing before signing anything is always a reasonable precaution, and we are a licensed and insured general contractor in the state of Washington.
One Team for Repairs and Larger Remodels
We handle standalone drywall repairs, as well as the drywall work that comes with a kitchen, bathroom, basement, or whole-home remodel. With this convenience, you don't need separate specialists.
Texture and Finish Work That Matches
Getting texture and finish right is standard, not an extra step. A repair can be durable and sound and still look patched if the finish doesn't match, which is usually the detail that separates skilled work from a rushed repair.
Transparent Estimates
Before any work begins, you'll get a clear explanation of what the project involves and how the cost breaks down, so there are no surprises once the job is underway. If the scope changes once a wall is opened up, such as unexpected water damage behind a patch, we'll walk you through it before moving forward.
What Affects the Cost of Drywall Repair and Installation
Here is some general market information to help you budget realistically; it is not representative of pricing. Industry data and typical project ranges don’t fully capture your home’s specifics, so treat these as a starting point rather than a quote.
Size and Type of Damage
Generally, small holes and dents commonly run from $300 to $499. Medium holes of 4–12 inches tend to cost $500–799. Larger sections that need new drywall can run $800–1,299 or more, with the specific damage and finish work moving the number within that range.
Water Damage and Mold
Water-damaged drywall repairs typically cost more than a standard patch, often ranging from $500 to $2,500 or more. That range reflects the extra work involved. Beyond the drywall itself, it usually means fixing the moisture source, assessing the area for mold, and possibly replacing insulation.
Ceiling vs. Wall Repairs
Ceiling repairs generally cost more than comparable wall repairs, mainly because overhead work requires more staging and access. Flaws are also more visible under raking light, which raises the bar on finish quality.
Texture Matching and Finish Level
Matching existing texture, whether it's orange peel, knockdown, popcorn, or a smooth finish, adds cost compared with a plain wall repair, since it takes expertise and material to blend into the surrounding surface without showing a seam.
New Installation vs. Repair
New drywall installation, which includes hanging the board and finishing the seams, commonly runs $1.50 to $4 per square foot or more. That's a different scope of work than a patch repair, and it's useful context if you're weighing a full-room replacement against ongoing repairs.
What Our Clients Say
We Accept All Types of Payments
Drywall Repair Service Area
Sea Renovation provides drywall repair and installation for homeowners in Seattle, Bellevue, Renton, Redmond, and Kirkland, WA. If your home is in one of these communities, our team will gladly take a look and talk through what the project needs. Contact us today to find out more.
Frequently Asked Questions
How much does drywall repair cost in Seattle?
Costs vary widely depending on the type of damage. Small holes and dents often range from $300 to $499, while larger repairs or water damage can run several hundred dollars or more. The best way to get an accurate number is to have our team inspect the damage.
Can you match my existing wall or ceiling texture?
Yes. Matching texture, whether it’s orange peel, knockdown, popcorn, or smooth, is a standard part of how we finish every repair, not an optional step. A structurally sound patch that doesn’t match the surrounding texture will still stand out, so we treat this as part of the job.
Can water-damaged drywall be repaired, or does it need to be replaced?
Water-damaged drywall usually needs to be cut out and replaced, and not simply patched, since moisture compromises the material and can lead to mold if it’s covered over. We’ll also help confirm the water source has been addressed, because repairing the drywall without fixing the underlying leak means the damage comes back.
Do you install new drywall, or only repair existing walls?
We handle both types of jobs. We do new drywall installation for remodels, additions, full room replacements, and basement buildouts, along with standalone repairs for holes, cracks, nail pops, and water damage. If you’re not sure which your project needs, we’ll assess it during a consultation.
Why does my drywall keep cracking in the same spot?
Recurring cracks are often a sign of a more serious problem: house settling, which is common in older Seattle homes. You’ll often see these cracks around doorways, windows, and ceiling corners. A proper repair uses flexible mesh tape and joint compound designed to handle minor movement rather than filling the crack, which is why poorly done repairs tend to reopen.
How long does drywall repair take?
Small patch repairs are often finished in a single visit, but the joint compound needs time to dry between coats. Larger repairs, water-damage jobs, full-room installations, and whole-home projects take longer and may need a return visit for final sanding, texturing, and paint prep. We’ll give you a realistic timeline before starting.
Do you handle drywall as part of a kitchen, bathroom, or basement remodel?
Yes. Drywall work is a routine phase of our kitchen, bathroom, basement, and whole-home remodeling projects, especially after plumbing or electrical work opens up a wall. If you’re planning a larger remodel, we handle drywall repair and installation as part of that same project rather than as a separate job.
Is drywall repair or full replacement better for extensive damage?
For isolated damage, such as a small hole, a minor crack, a nail pop, or a limited patch of water damage, a targeted repair is usually the better option. For extensive water damage, widespread cracking, damage covering a large portion of a wall or a ceiling, or damage affecting multiple rooms, full replacement of that section is often more cost-effective and longer lasting than repeated patching. We’ll walk your space and recommend the right approach.